Wgr MagnumWgr Magnum

Magnum WGR 1″ F

Quick Overview

Warthog MAGNUM nozzles have been designed and manufactured for longer durability (compared with the classic nozzles) and specific use with water recycling units.

Connection 1″
Ø x L (mm) 110 x 270
Weight (kg) 4.9
Front port 1 x 15°
Radial ports 2 x 85°
Rear ports 4 x 38°
Max pressure (bar) 350
Flow (lt/min) >190
Working DN (mm) 200-900

Available in ¾”, 1” and 1” ¼ sizes, they can be set with high quality steel inserts (AP2 type with flow straightener) or carbide ones. Jet configuration must be specifically ordered on the base of type (AP2 or carbide inserts) and cleaning action required (unblocking or rescaling).The WGR with SWITCHER head is 2 tools in 1. It is possible to switch between pulling or cleaning without removing the nozzle from the pipe. When the pump is idled down and brought back to pressure the tool will switch the water flow between two different sets of jets.

Advantages:
• Save water and time by eliminating the extra runs needed to swap nozzles.
• Run more jobs with one tank of water.
• Switch to pulling jets for maximum thrust.
• Switch to cleaning jets maximizes power to clear debris and cutting roots.

Part Number Description
74997.01.SI WGR 1″ Warthog nozzle, without inserts
TA.WGR STANDARD JET CONFIGURATION (4+ 1) W/AP2 INSERTS FOR WGR
TA.WGR.W STANDARD JET CONFIGURATION (4+ 1) W/CARBIDE INSERTS FOR WGR
TA.WGR.WDS DESCALING JET CONFIGURATION (4 +2+PLUG) W/CARBIDE INS.FOR WGR
74997.01.TSA SWITCHER HEAD (R31) FOR MAGNUM NOZZLE, W/AP2 INSERTS
74997.01.TSW SWITHCER HEAD (R31) FOR MAGNUM NOZZLE, WITH CARBIDE INSERTS
Top